American DJ Flatt Par Tri17 LED Lighting
Product Description
American DJ Flatt Par Tri17 LED Lighting
The ADJ Flat Par TRI7 is a professional low profile LED Par Can with extremely bright output. It features seven 3-Watt TRI LEDs (3-in-1 RGB) and will not cast any RGB shadows. The units low profile and dual hanging brackets make it ideal for mobile entertainers, permanent installations and for inserting into truss for uplighting.
The Flat Par TRI7 has 7 different DMX channel modes, and may also run in Sound Active or Master/Slave modes. Users can also go wireless with the ADJ LED RC wireless remote (sold separately). This LED Par Can also features: 32 Color Macros, Electronic Dimming (0-100%), IEC AC IN and OUT on rear to daisy chain power and a 40-degree beam angle. The Flat Par TRI7''''''''s LEDs are rated at 50,000 hours, and only draws 25-Watts of power per fixture.
Specifications:
Ultra bright slim Par Can with 7x 3-Watt TRI LEDs (3-in-1 RGB)
Great for performance stages where traditional par cans emit a lot of heat onto performers
Low profile case design
Wireless infrared remote control up to 15 ft./4.5M (Model: ADJ LED RC - sold separately)
7 DMX Channel modes: 1, 2, 3, 4, 5, 6 or 7 channel modes
6 Operational modes: Manual Color Mode; Color Change Mode; Color Fade Mode; Auto (Program Run) Mode; Sound Active Mode and DMX-512 Mode
Smooth RGB color mixing (fast or slow color change operation)
TRI LED (3-in-1) projects no RGB shadows
32 built-in Color Macros
Color strobe effect
Electronic Dimming: 0 - 100%
Beam angle: 40-degree
Linkable via 3-pin XLR cable (In/Out)
4-button LED DMX display on rear panel
Dual bracket system allows fixture to be hung or set on the ground
IEC AC IN/OUT outlets on rear to daisy chain power
Safety hook on rear panel
Includes gel frame for optional diffusion filters
Run all night - No duty cycle
Long Life LEDs (50,000 hrs.)
Power Draw: 25W max
Multi-voltage operation: AC 90V-240V 50/60Hz
Dimensions (LxWxH): 10.75x9x4.25/272x230x105mm
Weight: 7 lbs./2.8 kg.
ADJ LED RC Infrared Remote Control Features (sold separately):
Black Out: Turns fixture On/Off
Auto Run: Automatically run through built-in programs
Program Selection: Access units built-in programs
Flash: Strobe effect
Speed: Control speed of Auto Run
DMX Mode Select
Sound Active: Activates sound active mode
Slave: Designates the fixture as a slave fixture in the Master/Slave configuration
Set Address: Set DMX Address on a fixture
RGB Buttons: Adjust RGB colors with the + and - buttons
+ and - Buttons: Adjust flash rate, speed of the Auto Run and Program Selection